CHARACTERISTICS
- Highly effective dry-cleaning activator with excellent pigment dirt, and odour (smoke, kitchen, cigarette, vomit, urine) absorbing characteristics.
- Demonstrate best cleaning performance in the 1st bath.
- Equipment protection from biological contamination and corrosion.
- Consist special stabilize component for PERC.
- Low foam formation during distillation.
COMPOSITION
- Nonionic surfactants (>30%);
- Glycols (15-30%);
- Anionic surfactants (5-15%);
- Corrosion inhibitor;
- Water.
SHELF LIFE
24 months, storage in closed containers in dry place. Protect from sunlight. Approx. temp. +5 – +40°С (41 – 104°F).
APPLICATION
Dosage only in 1st bath: 2,0 – 4,0 ml per litre solvent.
Depending on the sensitivity of garments the cleaning time in the 1st bath should be from 2 to 4 minutes. Do not exceed the upper time limit!
In case of heavily soiled delicate textiles or textiles labelled as delicate, dosage of PLEX DryCleaner A in the 1st bath should be limited to 0.5% weight ratio of the machine capacity.
PLEX DryCleaner A is a dry-cleaning activator and contains no anti-static components.
The best cleaning results will be achieved with PLEX DryCleaner B or PLEX DryCleaner SC, are added to the 2nd bath.
Look after quality of solvent and distillation process. Change copper parts with water circulation in time. Use PLEX agents in full in order to maintain appropriate solvent pH-level, low foam formation, corrosion inhibition and prevent biological contamination.
PRECAUTIONS
- Use safety gloves, protect your eyes!
- Do not allow, when detergent has directly contact with delicate textiles before the solution is pumped up in the drum.
- It is not suitable for applying by brush.
- In case of doubt check decoloration and moisture sensitivity of the textile before using this detergent and before beginning the process.